Power Tools Product Recalls

This recall involves the M18 FUEL Top Handle Chainsaw, catalog number 2826-20 with a serial break identified with "A" in the product's serial number. The catalog number can be found on the upper right portion of the product's nameplate. The serial number can be found on upper left portion of the nameplate, and the serial break level is the 4th digit of the serial number. The product is a battery-operated chainsaw that comes with either a 12" or 14" bar, which is intended for use with Milwaukee's M18 batteries. The product is sold either individually as a bare tool that includes a chain and bar cover and blade wrench, or as a kit that includes two (2)M18 batteries, an M18 battery charger, a chain and bar cover and a blade wrench.

This recall involves defective plastic tip restraint kits (also referred to as furniture straps) manufactured by Cranach Hardware. The recalled tip restraint kits contain two white plastic brackets/mounts (one for connection to furniture and the other for connection to the wall), a white plastic cable zip tie, two different pairs of screws (one longer than the other), and two drywall anchors. The plastic in the brackets/mounts and the cable zip tie can break or degrade over time, which could lead to furniture tipping over if a consumer interacts with furniture that was secured by the recalled product. CPSC testing revealed that the recalled plastic tip restraints failed to meet the requirements of ASTM F3096-23, the industry standard for tip restraints. Young children or elderly adults could be severely injured if interacting with furniture that is secured to the wall with these defective plastic tip restraints.

This recall involves the RIDGID 18Volt Brushless 21-Degree Framing Nailer and the RIDGID 18Volt Brushless 30-Degree Framing Nailer. The model and serial numbers are located on the data plate found either on the side of the nail tray/magazine where the fasteners are loaded or on the bottom of the nailer where you insert the battery. Only nailers without either a black ink mark or a punched hole next to the serial number on the data plate are included in the recall. Model Number / Name number Serial Number Range R09894 - 18Volt Brushless 21-Degree Framing Nailer CS21146D220001 - CS24165N220001 R09895 - 18Volt Brushless 30-Degree Framing Nailer CS21275D220001 - CS24165N220001

This recall involves DEWALT Elite Grinder Series 4.5-inch 40G T27 High Density Flap Discs, models DWA8280HRT and DWA8280RT, that are compatible with angle grinders for heavy duty use. Only units with date codes 2024-36 to 2024-48 are part of the recall. The model number is on the front cover of the flap disc located at the top above the name "DEWALT." The date code for recalled discs is printed on the shipping boxes in year - week format and is also stamped on the individual discs. If you are unable to determine the date code, contact DEWALT for assistance.

This recall involves Hyper Tough 9 Amp Electric Corded 14" Chainsaws, Worx 8 Amp 14" Electric Chainsaws, Worx 8 Amp Electric Pole Saws, and Portland 9 Amp 14" Chainsaws. The Hyper Tough 9 Amp Electric Corded 14" Chainsaw is a black saw with red trim, marked Hyper Tough on the saw body and on the bar. The Worx 8 Amp 14" Electric Chainsaw is an orange and black saw marked WORX on the saw body and on the bar. The Worx 8 Amp Electric Pole Saw is an orange and black saw marked WORX on the saw body and on the bar and is shipped with an 8-foot pole extension. The Portland 9 Amp 14" Chainsaw is a green saw with a black bar, marked Portland on the bar. The following item numbers, SKUs, UPCs and serial number or manufacturing date ranges are included in the recall: Product Name Item/SKU/UPC Sold At Serial No. Range/Manufacture Date Range Hyper Tough 9 Amp Electric Corded 14" Chainsaws HT21-401-002-01 Walmart stores Walmart.com 10/10/2024 -12/01/2024 Worx 8 Amp 14" Electric Chainsaws WG305 Worx.com Amazon.com Serial No. Starts With [First Six Digits]: Between 202408 and 202501 Worx 8 Amp Electric Pole Saws WG309 Worx.com Amazon.com Serial No. Starts With [First Six Digits]: Between 202408 and 202501 Portland 9 Amp 14" Chainsaws SKU 58949 UPC 193175451774 Harbor Freight stores HarborFreight.com Between 37567 2442 and 37567 2451

This recall involves DR Power Equipment lithium-ion battery-powered chainsaws with the following model numbers: 414170, 414181, 41418 and 414170R. The chainsaws have a black handle and orange buttons, and a label printed with DR Pulse 62V. The model and serial number are printed on a white label located on the right side of the chainsaw handle. Note: If you choose to dispose of the recalled chainsaw's lithium-ion battery, do not throw this lithium-ion battery in the trash, in the general recycling stream (e.g., street-level or curbside recycling bins), or in used battery recycling boxes found at various retail and home improvement stores. Lithium-ion batteries must be disposed of differently than other batteries, because they present a greater risk of fire. Your municipal household hazardous waste (HHW) collection center may accept this lithium-ion battery for disposal. Before taking your battery to a HHW collection center, contact that office ahead of time and ask whether it accepts lithium-ion batteries. If it does not, contact your municipality for further guidance.

The recall involves Multi-Grip Tub Safety Bars sold under the brands Peerless, model PL585; Safety First, models SF585 and S1F585; and Delta, model DF585. The recalled Multi-Grip Tub Safety Bars are powder-coated aluminum, were sold in the color white, and feature a one-inch diameter tube with two gripping surfaces at about 8 inches and 15 inches. The model number and brand name are listed on a label on the product's packaging.

This recall involves the Monster Squeezable and Easter Squeezable designs of the Squeeze Plush Ball toys. The Monster Squeezable toys have model number 702053 and UPC code 810447020536, and Easter Squeezable toys have model number 768152 and UPC code 810067681520. The model number and UPC code are printed on a removable hang tag. The lot numbers that are included (PC: 0224 for Squeeze Plush Ball Monsters and PC:1223 for Easter Squeezable) are printed on the top right corner of the permanent sewn-on tag.

This recall involves commercial refrigerators with Secop compressors with model number NLE11MN. The recalled Secop Compressors installed in True Commercial Refrigerators were sold through corporate channels to commercial customers and to the commercial food service companies. The recalled commercial refrigerators are both black and stainless steel in color, and have configurations with double, triple, and sliding doors. The model and serial numbers are printed on a label located inside the commercial refrigerator cabinet by the left door. The following refrigerator models and serial numbers are included in this recall: Refrigerator Model First serial number Last serial number GDIM-49NT 9466976 10040916 GDM-45 9344197 10010080 GDM-47 9300299 10010063 GDM-47FC 9344301 10010081 GDM-47RL 9342885 10049968 GDM-49 9301457 10009796 GDM-49FC 9343416 9994430 GDM-49RL 9347552 10049976 GDM-69 9302194 10049977 GDM-69FC 9368706 10042783 GDM-72 9303855 10048931 GDM-72FC 9346330 10048907 T-49G 9789525 9872836 TSD-47 9364752 10042789 TSD-47G 9342889 10049972

This recall involves the braking system of the STIHL MSA 300, a battery-powered chain saw. The chain saw is gray and orange. "STIHL" and "MSA 300" are displayed on the side of the chain saw. The recalled chain saw's serial number is located on a label on the rear hand guard. Serial numbers lower than 447457319 are included in the recall.

This recall involves replacement lower blade guards sold for Chicago Electric Power Tools brand 12-inch Double Bevel Sliding Compound Miter Saws bearing item number 61970 and serial numbers less than 370331936. The saw's item number and serial number are printed on the bottom of the saw's warning label. The recalled lower blade guards are made of clear polycarbonate and gray polycarbonate with the words "Chicago Electric" stamped into the gray area. There is no serial number for the replacement guard. Only replacement guards, purchased during or after August 2019, are part of this recall.

This recall involves DeWALT Models DWS779, DWS780 and DHS790 Miter Saws. The saws have a yellow body with black accents and the DeWALT logo. The model number is printed on the saw's nameplate. Only saws with date codes 2019 04 through 2022 04 are affected. For the DWS779 and DWS780 models the date codes are marked on the black plastic motor end cap adjacent to the name plate. For the DHS790 model, the date code is marked on the outside of the plastic yellow housing adjacent to the batteries. Only saws without a green dot on the name plate or a black dot on the arm of the saw are included in this recall.

This recall involves the DeWALT DWCS600, Type 1 18-inch 15-amp corded chain saws. The chain saws are yellow with a black handle and motor cover. Only chain saws with date codes 2021 23-H5 to 2021 40-H5 are affected by this recall. The date code is stamped on the bottom of the chain saw, behind the chain/bar. DeWALT and 18-in. are written on the blade.

This recall involves the Mercury Glass Cabinet Knobs and Flower Glass Cabinet Knobs. The knobs are about two inches in diameter and in a flower shaped design. The Mercury Glass Cabinet Knobs are painted on the inside to give the appearance of mercury glass and the Flower Glass Cabinet Knobs are a pink colored glass.

This recall involves the Pickens Flip Up Towel Grab Bar, which has a straight bar designed for hanging towels and a curved grab bar designed for bodily support. The towel bar can be folded up vertically when not in use. The product was sold in brushed stainless steel and polished stainless steel finishes. SKU number 920115 is printed on the product purchase receipts and email order confirmations.

This recall involves CRAFTSMAN Model CMECSP610 10-inch corded chain saws with extension poles. The chain saws are red with black and gray accents. The name "CRAFTSMAN" is on the cutting bar and the motor end cap. The model number CMECSP610 is on the label on top of the motor. Only chain saws with date codes of 2019-40 through 2020-35 are included. The date code is laser etched on the underside of the handle base.

This recall involves Fiskars 16-foot extendable pole saw/pruners with model numbers 9463, 9440 and 9441. These pole saw/pruners are lawn and garden tools that extend from 7 feet to 16 feet and are used to cut high tree branches with either their pruner (for smaller branches) or their 15-inch hooked wood saw blade (for larger branches). The blade is secured to an oval-shaped fiberglass and aluminum telescoping pole set that locks into place through a double-locking system consisting of two orange c-clamps and a black and orange lock and pin mechanism in each of the upper and lower pole assemblies. They have an orange and black pole. "Fiskars" is printed on the pole. The model number is printed on the UPC code on the pole.

This recall involves Kobalt brand 40-volt lithium ion 12-inch cordless electric chainsaws. Date codes from 11/01/13 to 03/31/20 are included in the recall. The chain saws are blue and black. "Kobalt," "40v max" and "12 in. 30 cm" are printed on the chain saw. The model number and date code are printed on the label located in the rear handle. The UPC is located on the box. Description Model Number UPC Kobalt 40-volt Lithium-Ion 12-in Cordless Electric Chainsaw (Battery Included) KCS 120-07 84182102474-1 Kobalt 40-volt Lithium-Ion 12-in Cordless Electric Chainsaw (Battery Not Included) KCS 120 84182101749-1

This recall involves Kobalt brand 40-volt lithium ion 8-inch cordless electric pole saws manufactured from January 2017 through February 2019. Date codes from 01/01/17 to 02/28/19 are included in the recall. The item number and date code are printed on the side of the guide bar near the oil cap. Kobalt is printed on the side of the unit. Item Number Description 796791 Kobalt 49v 2.5AH Pole Saw 1083769 Kobalt 40v Pole Saw Bare Tool 970801 40v Pole Hedge Saw Combo Kit 812419 SOS Kobalt 40v Pole Saw 812424 SOS Kobalt 40v Pole Saw Tool Only

This recall involves Bastian teak medicine cabinets with one, two or three doors and one mirror on each door. The medicine cabinets are 24, 36, or 48 inches wide, corresponding to one, two, or three doors. The medicine cabinets were sold in natural teak, whitewash, and rustic brown finishes. A name plate with "Signature Hardware" is attached inside of the medicine cabinet door. The SKU number is printed on purchase receipts and email order confirmations. The SKU number corresponding to each size and finish is listed below: Size Finish SKU Number 24" Natural Teak 422703 Rustic Brown 422704 Whitewash 422705 36" Natural Teak 422706 Whitewash 422707 48" Natural Teak 422708 Rustic Brown 422709

This recall involves Troy-Bilt, Craftsman-branded trimmers and Remington-branded polesaws powered by a 25cc 2-Cycle gasoline engine. The trimmer's housing is red and black and Troy-Bilt or Craftsman is printed on the top of the unit. The polesaw's housing is orange and black and Remington is printed on the top of the unit. Trimmers and polesaws have serial numbers 1K199DG1886 through 1L059DH1017. The model and serial number is located on the white model label on the engine cover. The following model numbers are included in this recall. Brand Model Product Description UPC Code Troybilt 41AD252S766 41CDZ25C766 TB252S Straight Shaft Trimmer TB22 Curve Shaft Trimmer 084931848528 084931845725 Craftsman 41BDZ20C791 (CMXGTAMDZ20C) 41BDZ22C791 (CMXGTAMDZ22C) WC215 Curve Shaft Trimmer WS215 Straight Shaft Trimmer 084931847729 084931847736 Remington 41CDPS1C983 RM2599 Polesaw 084931843950

This recall involves Luyten white matte resin bath stools measuring about 16 inches wide by 11 inches deep by 17 inches high. Each features geometric cutouts on the sides, and each was sold with the SKU number 398753 printed on purchase receipts and email order confirmations.

This recall involves Porter-Cable brand 10" table saws with model number PCX362010. The saws have a gray body with black accents and the Porter-Cable logo. The model number and serial number are printed on the table saw's nameplate, located on the back of the saw body near the bottom.

This recall involves the DeWALT DWD110 and DWD112 3/8-inch variable speed reversing drills. The drills are yellow with black accents and have a power cable connected at one end. Only drills with date codes 2017-37-FY through 2018-22-FY are affected. If the drill is marked with an "X" after the date code it has already been inspected and is not affected. The model number is located on a label on the right side of the drill. The date code is etched into the body of the drill below the label. Consumers whose drill does not have a date code, or who cannot locate the date code should contact the company. Product Name UPC DeWALT DWD110 885911037518 DeWALT DWD112 885911057319

This recall involves Stanley Commercial Hardware's grade 1 mortise lever lock QMS/QME 100 Series. The recalled locksets have Bright Brass, Satin Brass, Oil Rubbed Bronze, Satin Nickel, Bright Chrome or Satin Chrome finish. The locksets were sold in 15 different "functions" or models that can be identified by the three digit number following the QMS/QME series, which is located on the mortise case that is installed in the door cavity. Only mortise locksets with the following model/series numbers are included in the recall. Model/Series Case Description QMS130 F1 Privacy QME130 QMS140 F22 Passage QME140 QMS145 F19 Privacy with Deadbolt QME145 QMS150 F4 Entry QME150 QMS152 F13 Exit QME152 QMS154 F20 Corridor QME154 QMS158 F11 Dormitory QME158 QMS160 F5 Classroom QME160 QMS162 F32 Classroom Security QME162 QMS164 F9 Apartment QME164 QMS170 F7 Storeroom QME170 QMS172 F30 Institutional QME172 QMS174 F14 Store Door QME174

This recall involves wall-mounted, folding shower seats made of teak wood slats joined together by support rods that extend from two wall mounting brackets. The recalled shower seats have brushed nickel, chrome or oil-rubbed bronze finishes on the support rods and bracket covers. The shower seats measure 16 inches wide by 13.5 inches deep, with a width of 11.75 inches between the centers of the wall mounting brackets. SKU number 917726 is printed on purchase receipts and email order confirmations.

This recall involves side handles supplied with Porter-Cable brand model PC70THD ½ Inch VSR 2-Speed Hammer Drills, Black & Decker brand model DR560 ½ Inch Drill/Drivers, and Bostitch brand models BTE140 and BTE141 ½ Inch Hammer Drills. The side handles are black plastic and attach to the drill to help provide stability. The Porter-Cable hammer drills are gray with red accents, the Black & Decker drill/drivers are orange with black accents, and the Bostich hammer drills are yellow with black accents. Product Name Model Number Porter-Cable ½ Inch VSR 2-Speed Hammer Drill PC70THD Black & Decker ½ Inch Drill/Driver DR560 Bostitch ½ Inch Hammer Drill BTE140 and BTE141

This recall involves two models of 14 inch chainsaws sold under three different brand names. The Portland and One Stop Gardens brand chainsaws have a green and black color scheme and "Portland" printed on the blades. The Chicago Electric brand chainsaw has a red and black color scheme and "Chicago Electric" printed on the chainsaw handle. All recalled chainsaws were sold with a black blade guard. The model number is printed on a label on the bottom of the chainsaw. Brand Model Number Color Portland 67255 or 61592 Green and black One Stop Gardens 67255 or 61592 Green and black Chicago Electric 67255 or 61592 Red and black

This recall involves Greenworks, Kobalt and Snapper brands of cordless electric chainsaws. The recalled chainsaws have a 16 or 18-inch saw and an 80 or 82-volt lithium ion battery. "GreenworksPro," "Greenworks Commercial," "Kobalt," or "Snapper" is printed on the saw blade. The model number and item number (if applicable) are printed at the top of the warning label underneath the chainsaw switch handle. Brand Product Colors Model Number Item Number Greenworks Pro 80v 16" brushless cordless electric chainsaw Green and black CS80L211 N/A Greenworks Pro 80v 18" cordless electric chainsaw Green and black CS80L00 N/A Greenworks Commercial 82v 18" cordless electric chainsaw Black GS 180 N/A Kobalt 80v 18" cordless electric chainsaw Blue and black KCS 180 419015 (sold without battery) 670251 (sold with battery) Snapper XD 82v 18" cordless electric chainsaw Red and black SXDCS82 1696773

This recall involves all I-Semble vertical and horizontal Murphy Bed hardware kits. The kits are used to assemble fold down beds and were sold in three sizes: twin, full and queen.The model numbers for the I-Semble vertical-mount Murphy bed hardware kit with mattress platform are: twin size, model #54877, full size, model #55991 and queen size, model #54386. The I-Semble horizontal-mount Murphy bed hardware kit with mattress platform twin size, model #50479, full size, model #53155 and queen size, model #58262 . They include a metal bed frame with wood slats for the mattress platform, a metal leg to support the foot of the mattress platform, mounting brackets to attach the metal bed frame to the wooden enclosure built by consumers, wall brackets to secure the wood enclosure to wall studs, and associated screws and bolts.

This recall involves Metabo 5-inch, 6-inch, and 7-inch rat tail angle grinders with a brake. Recalled models include WEPBA 17-125 Quick RT DS, WEPBA 17-150 Quick RT DS, and WEPB 19-180 RT DS. Serial numbers are from 70300xxxxx to 70700xxxxx. Model numbers and serial numbers are printed on a label on the bottom of the tool behind the red brake band.

The recall involves model number JT2504BD Black+Decker brand 10-inch table saws. The table saws sit on a black metal foldable stand. Black+Decker and JT2504BD are printed on the front right side of the table saw.

The recall involves model number 137.415030 Craftsman brand 10-inch table saws. The table saws sit on a black metal foldable stand. "15 AMP 10-inch table saw," "Sears Brands Mgt. Corp." and the model and serial numbers are printed on a silver label on the front. Serial numbers included in the recall begin with the following letters: RSN RSP RSQ RSR RSS RST RSU RSV RSW RSX RSY RSZ RTN RTP RTQ RTR RTS RTT RTU RTV RTW RTX RTY RTZ RUN RUP RUQ RUR RUS RUT

This recall involves STIHL MS 461 gas-powered chain saws, and the MS 461 R chain saw with a wrap handle. The model number is on the model plate, located on the starter cover. The chain saws are gray and orange with "STIHL" on the engine cover. Recalled chain saws have a serial number between 173092800 and 181993952, under the front hand guard on the engine housing's sprocket side.

This recall involves Restoration Hardware's Railroad Tie & Parsons Railroad Tie dining tables. The recalled tables are round or rectangular with thin sheets of zinc/dark gray color metal on the table tops. The item number is printed on a white sticker underneath the tabletop. Tables with the following item numbers are included in this recall: Description Item Number Railroad 72 Inch Rectangle Table in Zinc 62430028ZINC Railroad 84 Inch Rectangle Table in Zinc 62430018ZINC Railroad 96 Inch Rectangle Table in Zinc 62430027ZINC Railroad 108 Inch Rectangle Table in Zinc 62430016ZINC Railroad 120 Inch Rectangle Table in Zinc 62430026ZINC Railroad 48 Inch Round Table in Zinc 62430029ZINC Railroad 60 Inch Round Table in Zinc 62430017ZINC Railroad 72 Inch Round Table in Zinc 62430030ZINC Parsons Railroad Tie 60 Inch Rectangle Table Zinc 62430025ZINC Parsons Railroad Tie 72 Inch Rectangle Table Zinc 62430024ZINC Parsons Railroad Tie 84 Inch Rectangle Table Zinc 62430022ZINC Parsons Railroad Tie 96 Inch Rectangle Table Zinc 62430032ZINC Parsons Railroad Tie 108 Inch Rectangle Table Zinc 62430023ZINC Parsons Railroad Tie 120 Inch Rectangle Table Zinc 62430031ZINC

This recall involves Restoration Hardware's 18th Century Venetian style glass beveled mirrors. The recalled mirrors are antiqued silver with a wood backing and come in the following shapes and sizes. This recall only affects mirrors with a Hangman hanging system on the back. Mirrors with a production date after April 1, 2015 are included in this recall. The month and year of production (04/2015) are located on a green sticker affixed to the back of the mirrors. SKU Framed/Unframed Shape Size Retail Price 40200969SIL Framed Rectangle 36 x 48 $845 40200565SIL Framed Rectangle 36 x 48 $895 40200968SIL Framed Rectangle 42 x 78 $1595 40200967SIL Framed Rectangle 24 x 80 $895 40200966SIL Framed Rectangle 32 x 64 $945 40200965SIL Unframed Round 60 $1795 40200964SIL Unframed Rectangle 36 x 48 $895 40200963SIL Unframed Rectangle 30 x 40 $645 40200962SIL Unframed Rectangle 30 x 48 $695 40200563SIL Unframed Rectangle 42 x 78 $1595 40200562SIL Unframed Rectangle 24 x 80 $995 40200561SIL Unframed Round 60 $1795 106373SIL Framed Rectangle 30 x 40 $659 106372SIL Unframed Round 30 $579

This recall involves Craftsman-branded chainsaws powered by a two-cycle gasoline engine ranging in size from 42cc to 46cc and with either a 16-inch, 18-inch or 20-inch bar. The chainsaw's housing is red and black and Craftsman is printed on the side of the unit and on the bar. Chainsaws included in the recall have model numbers 41AY427S799 316.38070, 41AY429S799 316.38090, 41AY462S799 316.38098 and 41AY469S799 316.38188, and serial numbers 1K155XQ0198 through 1F076XQ0200; and were manufactured between November 15, 2015 and June 7, 2016. Model and serial numbers and the manufacture date are located on a white label above the rear handle. The second through fifth characters of the serial number identify the manufacturing date. The second character is the month with A = January, B = February, C = March, etc. The third and fourth characters are the day of the month. The fifth character is the last digit of the year of manufacture (e.g. B196 = February 19, 2016).

This recall involves Remington-branded chainsaws powered by a two-cycle gasoline engine ranging in size from 42cc to 46cc and with either a 14-inch, 18-inch or 20-inch bar. The chainsaw's housing is orange and black and Remington is printed on the side of the unit and on the bar. Chainsaws included in this recall have model numbers RM4214, RM4218 and RM4620 and serial numbers 1K155XQ0198 through 1F076XQ0200; and were manufactured between November 15, 2015 and June 7, 2016. Model and serial numbers and the manufacture date are located on a white label above the rear handle. The second through fifth characters of the serial number identify the manufacturing date. The second character is the month with A = January, B = February, C = March, etc. The third and fourth characters are the day of the month. The fifth character is the last digit of the year of manufacture (e.g. C286 = March 28, 2016).

This recall involves the Makita 5057KB 7-1/4" circular saw with dust collector. The model number and serial number are located on the black nameplate under the name "Makita." The saw's housing is a blue-green color and "Makita" is printed on the dust cover. The serial number ranges included in this recall are: 12638-12737, 12978-13027, 13208-13257, 13322-13351, 13376-13405, 13578-13627, 13658-13707 and 13900-13979.

This recall involves LF Products Sawyer swivel barstools sold in black, white, distressed blue, and dark brown. The recalled barstools have a tan cushion and were sold in two heights, 24 inches and 30 inches. "LF Products" is printed on a label affixed to the barstool.

This recall involves 4-inch air angle grinders with model number 20687. The model number is printed on the packaging. The grinders have a blue handle and some models have the ASC logo on the top.

This recall involves 3-inch, 5-inch and 6-inch Mirka CEROS compact electric random orbital sanders. The sanders are yellow and black with "Mirka" on the front. A speed control lever is on the top of the sanders and a vacuum hose connector on the rear. The recalled sanders came with either a cardboard box or plastic carrying case, a 12-foot power cord, DC transformer (only in certain sanders), a wrench, a multi-hole backup pad and assorted abrasives. The 3-inch sander is model CEROS 325. The 5-inch sander is model CEROS 550. The 6-inch sander is model CEROS 650. Model names are on a white sticker on the back of the sander housing beneath the hand grip, and in certain sanders, the serial number can only be found on this sticker. Serial numbers are engraved on the side of the sander housing just above the dust shroud. Sanders with serial numbers in the following ranges are being recalled: Model Number Serial Number Range CEROS 325 3442 32028001 to 3442 32028112 CEROS 325 3371 32024001 to 3373 32024015 CEROS 325 3373 32028001 to 3373 32028112 CEROS 550 3412 28672001 to 3422 28672039 CEROS 550 3432 28672001 to 3433 28672018 CEROS 550 3341 28672001 to 3342 28672064 CEROS 550 3342 31326001 to 3342 31326013 CEROS 650 3343 31322001 to 3343 31322048 CEROS 650 3343 28673001 to 3344 28673075 CEROS 650 3383 28673001 to 3384 28673030 CEROS 550 TGU65241 to TGU65528 CEROS 550 UNU62841 to UNU63176 CEROS 650 KTN61641 to KTN61880 CEROS 650 TCU64185 to TCU64376 CEROS 650 VNU68337 to VNU68480 CEROS 650 VUU65529 to VUU65720 CEROS 650 VVU66369 to VVU66512

This recall involves Bosch 1380 Slim small, 4.5-inch angle grinders with date codes 502 through 511. The model number and date codes are located on the name plate affixed to the underside of the grinder. The grinders are blue and silver with a black label and black and red control buttons. "BOSCH" is printed in red on the side of the product.

This recall involves YTL drywall lifts used for lifting sheets of drywall. The metal lifts are red, have three 30-inch legs with casters at the base, horizontal bars at the top to hold the drywall and a telescoping post that can extend vertically to a height of 11 feet using the manual crank. The recalled drywall lifts have a label on the vertical mast stating "PERFORMANCE BUILT," "MUD BOSS" OR "150 LB. DRYWALL PANEL HOIST."

The recalled allen + roth Linden and Brainerd Ironton wall plates have two plates that are attached by hidden fasteners: (1) a backplate that screws into the wall like traditional wall plates, and (2) a decorative cover that snaps over the cover through use of spring clips. The recalled plates have a smooth, metallic finish and fit a variety of switch and outlet designs. The recalled decorative wall plates snap onto the backplate without the use of screws. Under the decorative plate, the backplate is stamped with the letters "LHMC."

This recall involves Drill Master 18-volt cordless drills with item number 68239 and item number 68287. The drills are black with a red switch and were sold with an 18-volt rechargeable battery pack. Item number 68239 was sold individually and item number 68287 was sold as part of a kit, which included a flashlight. The flashlight is not included in the recall. The item number is located on a black label on the right side of the drill, just beneath the serial number. Drills with item number 69651 and item number 69652 are not included in the recall.

This recall involves the EY3530NQMKW 15.6V Cordless Metal Cutter Kit and the EYC136NQK 15.6V Cordless Metal Cutter Combo Kit. The model EY3530 metal cutter saw is a circular metal cutting saw in black with yellow accents. "Panasonic" is printed in white letters on the upper wrap around blade guard. "15.6 V" and "Metal Cutter Saw" are printed in black letters with yellow highlights on the blade guard. The recalled metal cutters are about 13 inches long and 6.7 pounds. The model EY136 combo kit includes the EY3530 circular metal cutting saw and also includes a drill and other accessories. The model number and date code are located on the bottom of the lower support, between the battery and the blade. The first number in the date code is the year, the second and the third are the month and the last four digits are the production number. Date Codes 3120001 through 3120030 4010001 through 4010030 4030001 through 4030030 4080001 through 4080060 5010001 through 5010060

This recall involves the Dremel® MICRO™ Model 8050 Rotary Tool with date codes 407 through 505. The model number and date codes are located on the name plate of the product, which is on the side opposite the Dremel logo. Products are dark gray with a silver label and blue control buttons and have 8V lithium ion batteries.

This recall involves Grizzly 10-inch hybrid table saws with model number G0771 and serial number between TS2014060001 and TS2014111244 or a date code between 06/2014 and 11/2014. The Grizzly logo, "G0771," the serial number and the date code are printed on the side of the table saw's enclosed white metal base. Grizzly.com is printed on a green band on the bottom of the base.

This recall involves a nut chopper sold by Avon. The recalled nut chopper is 7 1/2 inches tall and has clear plastic upper and lower chambers connected by an orange plastic grinding mechanism. The grinding mechanism has metal tines and a metal crank arm with an orange plastic grip handle. The lower chamber has a removable orange base and markings that show it holds about 1 1/4 cup of materials. The upper chamber has orange plastic lid. The product identification number found on the outside of the Nut Chopper individual, corrugated box packaging was F3730731 and the brochure number was 978-044.