Quick answer
Horizon Hobby Recalls Blade 700 X Pro Series Helicopter Kits, Spindle Sets Due To Injury Hazard is CPSC recall #14165, announced on April 30, 2014. The CPSC cites the following hazard: This recall involves Blade 700 X Pro Series Kit, Pro Series Combo and the replacement spindle set. The kits and combos come with parts to assemble a radio-controlled helicopter. When assembled, the helicopter is about 53 inches long and 15.5 inches tall and weighs about 12 pounds. It has a blue, yellow, black and silver canopy with the 700 X logo on each side, two white skids, a black tail boom with the word Blade on each side, a tail rotor and a main rotor assembly with two blades. The rotor blades are black and gray with the word Revolution on each. The defective washer is flat and silver and about 1/2 inch in diameter. It is used to hold the two main rotor blade grips in place on the helicopter. The recalled Pro Series Kit is model number BLH5725 and includes the helicopter canopy and the mechanical parts necessary to build the helicopter without the main rotor blades or electronics. The recalled Pro Series Combo is model number BLH5725C and includes the helicopter canopy, the mechanical parts necessary to build the helicopter, the main rotor blades, a receiver, servos and motor. The recalled replacement spindle set is model number BLH5703 and includes two spindle shafts, two screws and four washers. Model numbers for the kit and combo are on the UPC label on one end of the product packaging. The model number for the spindle set is on the front of the packaging. The remedy is consumers should immediately stop using the recalled radio-controlled helicopter and contact horizon hobby for replacement washers and instructions on how to install them.. Affected brands: Avix Technology, Taiwan, Horizon Hobby Inc., Champaign, Ill..
This recall involves Blade 700 X Pro Series Kit, Pro Series Combo and the replacement spindle set. The kits and combos come with parts to assemble a radio-controlled helicopter. When assembled, the helicopter is about 53 inches long and 15.5 inches tall and weighs about 12 pounds. It has a blue, yellow, black and silver canopy with the 700 X logo on each side, two white skids, a black tail boom with the word Blade on each side, a tail rotor and a main rotor assembly with two blades. The rotor blades are black and gray with the word Revolution on each. The defective washer is flat and silver and about 1/2 inch in diameter. It is used to hold the two main rotor blade grips in place on the helicopter. The recalled Pro Series Kit is model number BLH5725 and includes the helicopter canopy and the mechanical parts necessary to build the helicopter without the main rotor blades or electronics. The recalled Pro Series Combo is model number BLH5725C and includes the helicopter canopy, the mechanical parts necessary to build the helicopter, the main rotor blades, a receiver, servos and motor. The recalled replacement spindle set is model number BLH5703 and includes two spindle shafts, two screws and four washers. Model numbers for the kit and combo are on the UPC label on one end of the product packaging. The model number for the spindle set is on the front of the packaging.
Affected products
Radio-controlled helicopter kits and spindle sets
Recalled brands
Avix Technology, Taiwan, Horizon Hobby Inc., Champaign, Ill.
Remedy
Consumers should immediately stop using the recalled radio-controlled helicopter and contact Horizon Hobby for replacement washers and instructions on how to install them.
Recall date
April 30, 2014
CPSC recall #14165 covers Horizon Hobby Recalls Blade 700 X Pro Series Helicopter Kits, Spindle Sets Due To Injury Hazard, announced by the U.S. Consumer Product Safety Commission on April 30, 2014. The CPSC cites the following hazard: This recall involves Blade 700 X Pro Series Kit, Pro Series Combo and the replacement spindle set. The kits and combos come with parts to assemble a radio-controlled helicopter. When assembled, the helicopter is about 53 inches long and 15.5 inches tall and weighs about 12 pounds. It has a blue, yellow, black and silver canopy with the 700 X logo on each side, two white skids, a black tail boom with the word Blade on each side, a tail rotor and a main rotor assembly with two blades. The rotor blades are black and gray with the word Revolution on each. The defective washer is flat and silver and about 1/2 inch in diameter. It is used to hold the two main rotor blade grips in place on the helicopter. The recalled Pro Series Kit is model number BLH5725 and includes the helicopter canopy and the mechanical parts necessary to build the helicopter without the main rotor blades or electronics. The recalled Pro Series Combo is model number BLH5725C and includes the helicopter canopy, the mechanical parts necessary to build the helicopter, the main rotor blades, a receiver, servos and motor. The recalled replacement spindle set is model number BLH5703 and includes two spindle shafts, two screws and four washers. Model numbers for the kit and combo are on the UPC label on one end of the product packaging. The model number for the spindle set is on the front of the packaging.
The CPSC remedy for recall #14165 is consumers should immediately stop using the recalled radio-controlled helicopter and contact horizon hobby for replacement washers and instructions on how to install them.. Consumers should stop using the product and follow the instructions in the official CPSC notice.
If you sell Horizon Hobby Recalls Blade 700 X Pro Series Helicopter Kits, Spindle Sets Due To Injury Hazard on Shopify, stop selling the affected units immediately, notify customers who purchased them, and consider whether you have a Section 15(b) reporting obligation to the CPSC. RecallDocket helps Shopify merchants identify affected SKUs and prepare the required safety report.
The primary source is the official CPSC notice at https://www.cpsc.gov/Recalls/2014/Horizon-Hobby-Recalls-Blade-700-X-Pro-Series-Helicopter-Kits-Spindle-Sets. RecallDocket links to it from this page.
Sell on Shopify? Stay ahead of every CPSC recall.
RecallDocket automatically checks your catalog against new CPSC recalls and alerts you the moment one of your products is affected.
Install RecallDocket — free